Cultured Koi Windshield Banner - Black & Red

📏 60” x 10”

INSTALLATION INSTRUCTIONS:

*Pro tip: Ask a buddy for help. Installation is easier with two people. 

1. Clean Your Windshield with rubbing alcohol and a clean microfiber cloth. The alcohol removes any wax or other potential residue left by previous cleaning supplies. This step is necessary to ensure max longevity of your new windshield banner.

2. Position Your Banner. Do not remove the backing at this point. Once the banner is positioned, secure the center of the banner with a long piece of masking tape (almost like making a hinge point). 

3. Peel The Backing. Remove the backing paper off one half of the banner (stopping at the masking tape hinge). Cut and discard backing paper. 

4. Lay & Squeegee. Take a felt squeegee and, starting at the masking tape hinge, begin to lay the banner on your windshiel. Use light pressure on your squeegee to work out any air bubbles as you lay it down. Once the first side is laid down, remove the masking tape hinge, remove the other side's backing paper, and repeat this step to lay down the other side of the banner.

5. Trim The Edges. You will more than likely have to trim excess banner so it fits perfectly on your vehicle. Take a razor blade and very carefully trim around your windshield to remove the excess banner material.

6. Seal & Cure. Use your felt squeegee to secure any fresh edges. Wait at least 48 hours before exposing your windshield banner to harsh weather or wiper blades. 

Tada! You've installed a cool new windshield banner! Enjoy 😎